• 1/1

precision conductivity instrument dds-k8凯发手机app下载

share
detail

an overview of the

dds-11a digital display conductivity meter is a precision instrument used to measure the conductivity of various liquid media in laboratory. when equipped with 0.1, 10 constant conductance electrodes, high pure water conductivity or high conductivity water can be accurately measured.

main design features of the instrument:

& bull; high reliability and stability

& bull; advanced circuit structure

& bull; output measuring signal

& bull; high definition digital display (word height 20mm 3 1/2 bit)

technical performance

1. equipment operating conditions

power supply: ac220v± 10%v, 50 hz /60hz

to ensure accurate and reliable instrument measurements, please use the following environmental conditions: environment

temperature 0 ℃ ~ 40 ℃; air relative humidity ≤ 85%; no significant vibration, strong magnetic interference

2. main technical parameters

measuring range 0 ~ 2× 105 (& mu; s/cm)

accuracy & plusmn; 1% f * s

instrument stability: 0.5%

temperature compensation scope 15 ~ 35 ℃)

output measuring signal 0 ~ 20(mv)

instrument appearance size 240× 170 & times; 60 (mm)

instrument weight: 0.7 (kg)

power consumption: 3 (w)

specification constants: 0.01, 0.1, 1, 10

electrode specification constant

0.01

0.1

1

(light)

1

(platinum black)

10

applicable range of measurement μ s/cm

0 ~ 3

0.1 ~ 30

1-100

100 ~ 3000

more than 1000

this instrument is equipped with one (standard set) conductive electrode (platinum black), whose specification constant j0=1. other specification constant electrode, the user according to need another match.

2. scope of instrument range display

this instrument has four ranges

when the specification constant j0=1 electrode is selected for measurement, its range is shown in table 2.

when j0=1 in table 2, the corresponding range of each range segment of the instrument is displayed

the serial number

range switch position

instrument display range

corresponding range display range (μ s/cm)

1

20 & mu; s.

0 ~ 19.99

0 ~ 19.99

2

200 & mu; s.

0 ~ 199.9

0 ~ 199.9

3

2 ms

0 ~ 1.999

0 ~ 1999

4

20 ms

0 ~ 19.99

0 ~ 19990

note: range 1 and 2, unit μ s; range 3, 4, ms. its relation: 1μ s = 10-3 ms = 10-6 s

when choosing constant electrodes of other specifications, the range of their range is shown in table 3.

table 3 shows the range of the constant electrodes of other specifications

sequence

no.

range

switch setting

instrument display range

select electrode specifications and constants

corresponding range display range (μ s/cm)

j0 = 0.01

j0 = 0.1

j0 = 10

1

20 & mu; s.

0 ~ 19.99

(0 ~ 19.99) & times; 0.01

(0 ~ 19.99) & times; 0.1

(0 ~ 19.99) & times; 10

2

200 & mu; s.

0 ~ 199.9

(0 ~ 199.9) & times; 0.01

(0 ~ 199.9) & times; 0.1

(0 ~ 199.9) & times; 10

3

2 ms

0 ~ 1.999

(0 ~ 1999) & times; 0.01

(0 ~ 1999) & times; 0.1

(0 ~ 1999) & times; 10

4

20 ms

0 ~ 19.99

(0 ~ 19990) & times; 0.01

(0 ~ 19990) & times; 0.1

(0 ~ 19990) & times; 10

k = d× j

k: measured liquid conductivity; d: instrument display value; j: specification constant of conductance electrode.

3. operation

first case: no temperature compensation (basic law)

1 & ndash; 1. constant correction

for electrodes of the same specification of constant, the range of the actual conductivity cell constant is j1= (0.8 ~ 1.2) j0. in order to eliminate the actual deviation, the instrument is provided with constant correction function.

operation: turn on the power switch, timely isothermal. temperature compensation button buy 25 ℃ scale value. set instrument measuring switch ‘ the correction & rsquo; & rsquo; adjust the constant correction button to display the actual constant (coefficient) value of the battery. when j1=j0, the instrument displays 1.000; when j1=0.95j0, the instrument shows 0.950; when j1=1.05j 0, the instrument displays 1.050. as shown in table 4.

specifications

constant

j0

j1 = 0.950 j0

j1 = 1.050 j 0

j1

constant correction display

j1

constant correction display

0.01

0.0095

0.950

0.0105

1.050

0.1

0.095

0.105

1

0.95

1.05

10

9.50

10.5

whether the electrode is connected, and where the instrument range switch is, does not affect the constant correction.

when the new electrode is delivered from the factory, its j1 is generally marked at the corresponding position of the electrode.

网站地图